Pay in installments of $93.88 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 1 - Aug 6
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
EBC S20 Brake Pad and Rotor KitSave 15% over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors for BOTH FRONT AND REAR axles and caliper lube. High efficiency Ultimax EBC pads built with Aramid fiber, fully shimmed and chamfered with patented EBC Brake in coating for faster pad brake in after install. Rotors are a direct fit OEM replacement with geomet anti rust surface coating, fully balanced and runout tested for smooth braking. Balanced
Save 15% over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors for BOTH FRONT AND REAR axles and caliper lube. High efficiency Ultimax EBC pads built with Aramid fiber, fully shimmed and chamfered with patented EBC Brake-in coating for faster pad brake in after install. Rotors are a direct fit OEM replacement with geomet anti rust surface coating, fully balanced and runout tested for smooth braking. Balanced and maximum Braking effect only happens when all brakes are working and the often forgotten rear brakes account for up to 40% of your vehicles stopping power. Renewing front and rear at the same time makes perfect sense.
- Direct Fit; No Changes Required Over Stock Set Up
- Pads And Rotors For Both Front And Rear Axles
- Front And Rear Daily Driver Brake Kit
- No Changes Required Over Stock Set Up
- For Cars; Trucks And Suvs Alike
- Quality British Made EBC Brakes
- Premium G 3000 OEM Style Rotors
- 10;000 Mile No Hassle Warranty
- 000 Mile No Hassle Warranty
- Geomet Anti Rust Coating
- Trucks And Suvs Alike
- Direct Fit
- For Cars
- 10
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2005-2007 | Chrysler | 300 | Base |
| 2005-2009 | Chrysler | 300 | C |
| 2005-2009 | Chrysler | 300 | C SRT8 |
| 2005-2012,2015 | Chrysler | 300 | Limited |
| 2008-2009 | Chrysler | 300 | LX |
| 2009 | Chrysler | 300 | Signature Series |
| 2005-2010 | Chrysler | 300 | Touring |
| 2006-2007 | Dodge | Charger | Base |
| 2017-2018 | Dodge | Charger | Daytona |
| 2017-2018 | Dodge | Charger | Daytona 392 |
| 2006 | Dodge | Charger | Daytona R/T |
| 2018-2023 | Dodge | Charger | GT |
| 2018 | Dodge | Charger | GT Plus |
| 2006-2023 | Dodge | Charger | Pursuit |
| 2006-2022 | Dodge | Charger | R/T |
| 2017-2018 | Dodge | Charger | R/T 392 |
| 2015-2016 | Dodge | Charger | R/T Road & Track |
| 2015-2018 | Dodge | Charger | R/T Scat Pack |
| 2019-2022 | Dodge | Charger | Scat Pack |
| 2020 | Dodge | Charger | Scat Pack 392 Widebody |
| 2022 | Dodge | Charger | Scat Pack Widebody |
| 2006-2017 | Dodge | Charger | SE |
| 2015-2018 | Dodge | Charger | SRT 392 |
| 2015-2020 | Dodge | Charger | SRT Hellcat |
| 2021-2022 | Dodge | Charger | SRT Hellcat Redeye Widebody |
| 2020-2022 | Dodge | Charger | SRT Hellcat Widebody |
| 2022 | Dodge | Charger | SRT Jailbreak |
| 2006-2010,2012-2014 | Dodge | Charger | SRT8 |
| 2006-2010,2012-2023 | Dodge | Charger | SXT |
| 2012,2018 | Dodge | Charger | SXT Plus |
| 2018 | Dodge | Charger | SXT Plus Leather |
| 2005-2008 | Dodge | Magnum | R/T |
| 2005-2008 | Dodge | Magnum | SE |
| 2006-2008 | Dodge | Magnum | SRT8 |
| 2005-2008 | Dodge | Magnum | SXT |
| 2005 | Dodge | Magnum | SXT Special Edition |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 26 reviews
Sort
Product Reviews
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Light and easy to move around! Still sturdy and tall like I wanted.
Color: Grey, Size: 2 Large Panels
Easily put together, work excellently for a room divider and taller than I am at 5'9" so that makes the privacy really great for our purposes. The feet turn and so you can get them out of a pathway as needed, the middle one that has two posts in it does not move but the end ones do. Very LIGHT so not hard to move around. Fabric is not see through. We have a lamp on one side and you can see the light through it but that is not an issue for us. The price is right!! most cubicle kinds of walls are so, so, so much money. With these being light and still give privacy the price was great. If you want them for sound, this is not the product for you but really most cubicle calls are not going to give you privacy other than visually anyway and these do that well. The size was accurate and so fit exactly how I needed them to and that was an important point for me. I used both of them in L shapes for my room and the size was right on.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 8, 2025
★★★★★ 5
Almost perfect
Color: Black, Size: 2 Large Panels, Color: Black, Size: 2 Large Panels
The cloth material is sturdy and fits well on the design. Both sides are black and you can't tell a difference between each side. It's extremely light weight and easily movable. We got a double and a single and the single is used as a sliding door. It's definitely not the MOST stable thing but overall it's pretty stable, probably won't work GREAT on carpet. It's not see through at all, which is great, the only downfall is the gap between the two sides. We are using a blanket to cover the gap. It's not 6 foot tall, but you can adjust the feet on it to be taller. Overall it's a great product for the price and can easily be moved out of they way.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 5, 2024
★★★★★ 5
A decent buy
Color: Black, Size: 1 Large Panel
Easy to assemble, good quality fabric, the two horizontal "feet" are supposed to be stabilized by a knob/screw but its always looosening up with even the slightest move, so the only unfortunate thig is that it requires constant turning to tighten it if you adjust its location even a teensy bit. I used it as a backdrop to hold a design of balloons, then since the party I use it as a "semi" partition in a bedroom. Good value for the money since it can be used over and over.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 24, 2025