Pay in installments of $1605.00 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 9 - Aug 14
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Power Conditioner, Voltage Regulator, & Battery Backup UPS For Agilent 6400 Series Triple Quad LC/MSThis system is designed to provide voltage regulation, surge suppression, and automatic emergency backup power specifically for the Agilent 6400 Series QQQ (Triple Quad) LC MS (G6410A, G6410B, G6420A, G6430A, G6460A, G6460C, G6470A, G6490A, or G6495A). Software Loaded For Specific Instrument Operation The UPS is loaded with software settings that limit the voltage fluctuations to within the range specified within the instrument site preparation guide.
This system is designed to provide voltage regulation, surge suppression, and automatic emergency backup power specifically for the Agilent 6400 Series QQQ (Triple Quad) LC/MS (G6410A, G6410B, G6420A, G6430A, G6460A, G6460C, G6470A, G6490A, or G6495A).
Software Loaded For Specific Instrument Operation - The UPS is loaded with software settings that limit the voltage fluctuations to within the range specified within the instrument site preparation guide.
Hardware Configuration For Specific Instrument Operation - The UPS internal bypass wire is removed which prevents voltages outside the acceptable operating range specified in the site preparation guide of the instrument to be passed through to the instrument.
-
Cuts Utility/Electric Costs compared to other battery backup UPS systems.
-
Slashes Setup/Installation Costs by requiring only a single receptacle for the UPS to be plugged into for power. If you don't already have the required receptacle, it can be installed by an electrician in advance of receiving the UPS and typically costs a fraction of the cost that it would cost to normally hardwire the UPS into an electrical panel.
-
Reduces Setup Time as the system arrives on a mini pallet with ramp included, rolls off the pallet, plugs into your wall receptacle, has a single switch/breaker on the back, and an ON button on the front LCD. The pre-installed dual voltage output PDU (power distribution unit) has all of the most used receptacles in North America so equipment can simply be plugged in. Unpacking, setup, and power up can be done within 5-10 minutes with only a Phillips screwdriver to unscrew the pallet blocks.
-
Eliminates Down Time as short duration power outages, voltage inconsistencies, surges, and other power issues are isolated away from any equipment you attach to the output receptacles.
-
Prolongs Equipment Life as built in circuit protection and voltage regulation ensure only the correct operating voltage is provided to the instrument at all times. Our factory configures this variation of the battery backup UPS in power conditioning mode so the unit will NOT ever switch to bypass mode which would potentially expose the attached equipment to the power problems and improper voltages.
-
Multiple Device Support as up to 6,000 VA of power consumption can be handled by the UPS. The output PDU has multiple receptacles and 2 simultaneous voltage outputs that match each receptacle type.
- Plug And Play Functionality, rolls off the pallet ready to plug in and turn on.
- INPUT: NEMA L6-30P (Plug)
- 208, 220, 230, or 240 Volts Single Phase, 30 Amp Breaker
- OUTPUT:
- 8x NEMA 5-15/20R (Receptacles, 115 Volts)
*Fits Either NEMA 5-15P (Plug) Or NEMA 5-20P (Plug) - 1x NEMA L5-30R (Receptacle, Twist Lock, 115 Volts)
*Fits NEMA L5-30P (Plug, Twist Lock) - 2x NEMA L6-15R (Receptacle, Twist Lock, 230 Volts)
*Fits NEMA L6-15P (Plug, Twist Lock) - 1x NEMA L6-20R (Receptacle, Twist Lock, 230 Volts)
*Fits NEMA L6-20P (Plug, Twist Lock) - 4x NEMA 6-15/20R (Receptacles, 230 Volts)
*Fits Either NEMA 6-15P (Plug) Or NEMA 6-20P (Plug) - 1x NEMA L6-30R (Receptacle, Twist Lock, 230 Volts)
*Fits NEMA L6-30P (Plug, Twist Lock)
User Guides:
-Battery Backup Power 6KVA-10KVA 1.0 PF Advanced Digital Tower UPS User Guide
-Battery Backup Power SNMP Card Full User Guide.pdf
Spec Sheet/Cut Sheet:
-BBP 4.5-10KVA 1.0 PF Advanced Digital Tower Specification Sheet.pdf
Complete 5 Tier Power Protection System – Surge Protection, Real Time Power Conditioning With Voltage Regulation, Heavy Duty Isolation Transformer, Pure Sine Wave Output, & Always On Double Conversion Backup Power Technology.
Extreme Energy Savings - Saves up to $1,892.16 per year over older model 6 KVA UPS systems in annual electricity costs due to energy efficiency enhancements.
Multiple Backup Time Options:
| Model Number: | Description (Under Battery Options Drop Down): | Approximate Backup Time At Full Load: |
| BBP-ADV-6K-L630P-115230PDU-6400LCMS | UPS With Internal Batteries Only (20 Batteries, 12 Volts, 9 Amp Hours Each) 2.16 KWH | 15 Minutes |
| BBP-ADV-6K-L630P-115230PDU-6400LCMS-WEBPWC | UPS Plus 1 Extra External Battery Pack (80 Batteries, 12 Volts, 9 Amp Hours Each) 8.64 KWH | 1 Hour 0 Minutes |
| BBP-ADV-6K-L630P-115230PDU-6400LCMS-W2EBPWC | UPS Plus 2 Extra External Battery Packs (140 Batteries, 12 Volts, 9 Amp Hours Each) 15.12 KWH | 1 Hour 45 Minutes |
| BBP-ADV-6K-L630P-115230PDU-6400LCMS-W3EBPWC | UPS Plus 3 Extra External Battery Packs (200 Batteries, 12 Volts, 9 Amp Hours Each) 21.60 KWH | 2 Hours 31 Minutes |
| BBP-ADV-6K-L630P-115230PDU-6400LCMS-W4EBPWC | UPS Plus 4 Extra External Battery Packs (260 Batteries, 12 Volts, 9 Amp Hours Each) 28.08 KWH | 3 Hours 16 Minutes |
| BBP-ADV-6K-L630P-115230PDU-6400LCMS-W5EBPWC | UPS Plus 5 Extra External Battery Packs (320 Batteries, 12 Volts, 9 Amp Hours Each) 34.56 KWH |
4 Hours 1 Minutes |
*Note: The 6 kVA model now has 9 amp hour batteries installed instead pf the standard 7 amp hour batteries. This increases battery capacity and backup time by approximately 22%.
- 6000 VA (6 kVA) / 6,000 Watt (6 kW)
- N+1 And Parallel Operation Up To 24 kVA (4 Units In Series)
- Energy Efficient/High Efficiency UPS Mode
- LCD Status Measurements Include Voltage, Frequency, Load Level, Battery Level, Output Current, and Estimated Remaining Backup Time
- Tower With Casters
- Pure Sine Wave Clean Output To Operate And Maximize The Life Of Even The Most Sensitive Electronics
- Online (Double Conversion) - Highest Level Of Protection Available - Battery Power Always Engaged, No Switching Delay (Phase Locked To Input Power Source)
- Wide Frequency Input Range (44-66 Hz Auto Sensing) Allows For Generator Power To Be Used As A Primary Or Secondary Input Power Source (Using Automatic Transfer Switch Before UPS)
- Constant Voltage Regulation (±1%)
- Constant Frequency Regulation (±1 or ±3% Selectable)
- Factory Warranty: 3 Years On Electronics And 1 Year Warranty On Batteries
- Optional Extended Warranty: 5 Years On Electronics And 1 Year Warranty On Batteries
- Digital Signal Processing (DSP) Allows For Greater Reliability Over Older UPS Designs And Superior Electric Noise Filtration
- >0.99 Input Power Factor / 1.0 Output Power Factor (Line Mode) / High Efficiency Mode For Superior Efficiency And Power Savings
- UPS Weight (Excluding Optional External Battery Packs): 264 lbs.
- Dimensions (Inches): 9.5 X 26 X 20 (W x H x D)
- Operating Temperature: 32°-104° F
- Operating Humidity: 20%~95%, Non-Condensing
- Operating Elevation: 3,280 Feet Without De-Rating
- Cold Start Capable (Shipped With Cold Start Disabled, Will Enable Automatically After Receiving Power For The First Time After Shipping)
- cTUVus, cULus, and FCC Certified
- Includes Software For Windows Monitoring & Configuration
Replacement Batteries:
-Leoch DJW12-9.0 (Lead Acid), Leoch LP12-9.0 (Lead Acid), Betta Batteries 6-HCNFJ-7.2 (Lead Crystal), Or Battery Backup Power BBP-LIFEPO4-HDR-12V-7.2AH (Lithium Iron Phosphate)
Do you need a PDF quote or a custom emergency backup solution? Email us at [email protected].
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 25 reviews
Sort
Product Reviews
★★★★★ 4
Had no issue and it was very easy to use. It has been a week and no leak.
Size: 01- 24pcs (Classic Green)
Easy to use and its been a week and no leak. The kit is great and easy to use. The hard part was for me to get the screw out of my tire because the head was half gone. Once I got the screw out I followed the instructions and reamed the hole and inserted the plug and trimmed the plug.
If you plan on keeping it in your car you probably should add a screwdriver and/or pliers to get the screw out of the tire and a razor to trim the plug once it is in. You really need a razor to trim the plug I tried with a knife but the had to get a razor.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2025
★★★★★ 5
Great Item
Size: 01- 24pcs (Classic Green)
Nice kit. Has athe tools and pieces for many easy repairs. Fits neatly inside durable case.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
★★★★★ 5
Quality product
Size: 07- 22pcs (Blue)
Great kit for the price. Reamer and plug tool are strong and durable. Removable handles makes it great for broken tool or putting reamer on a drill if your lazy like me. Easy to use, easy to store and quality plugs
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 30, 2025
★★★★★ 5
Emergency flat tire repair kit
Size: 02- 24pcs (Black)
Experience confidence on every road with the 24 Pcs Professional Heavy Duty Universal Emergency Flat Tire Repair Kit, the ultimate solution for fast, reliable, and long-lasting tire repairs. Designed for cars, motorcycles, trucks, trailers, RVs, ATVs, UTVs, and more, this kit provides everything you need to fix punctures quickly—without calling roadside assistance or waiting for a tow truck.
Built with high-quality, heavy-duty materials, each tool in the set is engineered for durability and performance. The solid steel T-handle reamer and inserter tools offer maximum strength, giving you the leverage and control needed to remove debris and plug punctures with ease. The professional-grade rubber repair plugs are strong, flexible, and designed to create an airtight seal, ensuring your tire holds pressure even in demanding conditions. Whether you’re dealing with a nail, screw, or sharp stone puncture, this kit helps you handle the situation safely and efficiently.
The set includes 24 essential pieces, such as repair plugs, valve stems, valve caps, a pressure gauge, lubricant, and additional accessories that make the repair process smooth and straightforward. Every item fits neatly into the compact, shock-resistant storage case, making it easy to carry in your vehicle’s trunk, glove box, or toolbox. This kit is perfect for emergency situations, long road trips, off-road adventures, work vehicles, and everyday drivers who want to be prepared for anything.
Even if you’re not a mechanic, the repair process is simple. The kit includes all the tools needed to clean, prepare, and seal the puncture, allowing you to get back on the road in minutes. It’s a cost-saving, time-saving, and stress-reducing solution every driver needs.
Stay prepared, stay protected, and stay moving with the 24 Pcs Universal Heavy Duty Tire Repair Kit—a reliable companion designed to handle unexpected flats with professional power and everyday convenience.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 25, 2025
★★★★★ 5
Convenient
Size: 01- 24pcs (Classic Green)
Very nice kit with everything in one zippered pouch.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 28, 2026