Command Access PD18-RIM / PD19-RIM Rim Exit Device

PD18-RIM Install

• Easy Install- Utilize existing hardware with no additional
prep required
•Long wire runs w/ 18ga - No need for speciality power
supply right above the door.
•3 Year No Hassle Warranty

The Command Access PD18 series is available as solenoid latch retraction Grade
1 storefront exit device; made for use in all institutions and commercial buildings
storefront applications. Install this device with the confidence of knowing that the PD18
series meets or exceeds the high standards of other grade 1 products and carries our
3-year “no hassle “ warranty, meaning we will support you. In retrofit situations for the
Adams Rite 88 or 8600 series you can utilize the existing hardware (i.e vertical rods)
with no additional prep required. The PD18-RIM is also available in 12V version.

RIM:
• Voltage range – 12VAC/DC+/- 10%; 24VAC/ DC +/- 10%
• Current - 900mA @12VDC
• Current - 450mA @24VDC
• 500’ with 18ga wire

Accessories - Additional Charges • Request to Exit (REX) - Switch available
factory installed
• Request to Exit Kit (PD18REXKIT) - Switch available for installation in the field
• QC Connectors: Molex door cords with quick connectors for plug and play install

• High-Performance quality solenoids designed for demanding applications
• CVR includes the patented PM300 interface power modules programmed to maximize the efficiency and
life of the solenoid.
• Extended duration latch pullback capability for “continuously on” conditions
• The “local boost” design allows for centralized power supplies and extended wire runs up to 500’ with 18/2 wire
• The slim, compact attractive low profile design enables
mounting on narrow-style doors.
• Retrofits Adams Rite 8800/8600 series
• Maintains factory dogging
• RIM device available in 12V version.
• 6’ cable with Quick Connect for PM300 module to easily connect to power supply lead
• Non-handed
• 3-year “no hassle” warranty - Longer than the tradtional 1 year warranty because our stuff works!

Handing
• Device is non-handed.
Pushbar Length
• Standard sizes: dimensioned for 36” and 48” openings. Standard width
bars can be field cut to the next smallest opening width.
48” - Cutdown ”
36” - Cutdown 1”
Door Thickness
• Suits 1-3/4” standard
Projection
• 2-5/8” when fully projected, 1-5/8”
when dogged.
Stile Worth
• Minimum 2” Stile. Fits narrow, medium, and wide
stile aluminum doors.
Dogging
• Standard dogging with hex key or cylinder dogging option. Electric
dogging also available.

Fasteners
• Standard self-tapping screws.

Vertical Rods
• Top and bottom steel rods for easy adjustment. • Standard device is adjustable for nominal door heights.